Dynamic wagon scales without foundations up to 90 km

Name: Metas
Address: Володимира Сосюри, 68, Київ, Ukraine
Telephone: +38 (0800) 301 770
Price range: $$

General information

METAS dynamic rail wagon scales are designed for weighing by wagon or axle mass during the movement of empty and loaded wagons in a train without uncoupling, as well as for weighing trains in general with dry bulk, solid, and liquid cargo at speeds up to 90 km/h.

The innovative design of the load-receiving device based on unique rail-type sensors ensures perfect integration of weighing equipment into the existing railway track. Scales that do not require a foundation and are installed on a crushed stone base in 1 day.

Find out the price or get a consultation

Submit a request

Стандартные опции

Тара 0…100%

Автоматична стабілізація ваги

Програмний захист від несанкціонованого доступу до результатів зважування

Сигналізація щодо перевантаження

Автоматичне встановлення нуля

Інтерфейс RS-232

Програмне забезпечення

Additional options

Інтерфейс RS-485

Система відеонагляду та зчитування номерів авто

Інтерфейс Bluetooth

Інтерфейс WIFI

Дублююче табло

Захист від гризунів

Вибухозахищене виконання

Зважування кожної осі автомобіля

Technical parameter, characteristic	Parameter value
Accuracy class according to DSTU OIML R 106-1:2017	0,5; 1; 2; 5
Transit speed, km/h	unlimited
Direction of movement when weighing	two-sided
Type of wagons	any
Number of wagons	unlimited
Cargo flow per day	unlimited
Data transmission distance, m	unlimited
Operating mode	automatical
Number of weighing modules, pcs.	4
Temperature range, °C	от -50 до +50
Rail type	Р65
Degree of protection according to DSTU 14254:2006, not less than: strain gauges weighing instrument	IP67, IP67
Sensor type	analog
Supply voltage, V	220
Supply voltage and frequency, V; Hz	220 (+ 22; – 33); 50 ± 1
Power consumed by the scales, W, no more	1000
Average service life not less than, years	10

Speed range	Accuracy class when respected in Russia
	wagon	train
From 1 to 10 km/h inclusive	0,5; 1; 2; 5	0,2; 0,5; 1; 2; 5
From 10 to 20 km/h inclusive
From 20 to 40 km/h inclusive		0,5; 1; 2; 5
From 40 to 60 km/h inclusive	5	1; 2; 5
From 60 to 90 km/h inclusive		2; 5

- Recommended for use by experts of JSC “Ukrzaliznytsia”
- Quick installation and commissioning
- Installation of weighing equipment in one work shift
- Weighing at high speeds while driving
- Reliability in conditions of intensive freight traffic
- Control of load distribution on the sides and bogies of the car
- Possibility of installation on railway tracks with SCB chains
The load-receiving device of the wagon scales is a P65 rail with a length of 9 (m) with built-in weight-measuring strain gauge sensors.

The scales consist of a load-receiving device (hereinafter referred to as the RPD), made in the form of parallel sections of rails, combined into a platform with four rail-type strain gauge sensors (hereinafter referred to as the sensor), built-in two per rail section. The RPD includes from one to eight platforms.

The scales also include access roads adjacent to and located on both sides of the runway. When measuring the static mass, all axles of the weighed wagon must be in the weighing zone.

The sensors are connected using an analog data processing device (hereinafter referred to as the POAD) – the TenzoADC-4CH weighing device to a software and hardware complex based on a personal computer or controller. The PTK provides data processing, weighing process control, and display/registration of measurement results and includes the software “ARM “Wagon Scales”.

The POAD is located in a protective box near the scales or on the platform on which the scale runway is located.
Scale series model Maximum weight of the wagon, t Max, t Maxl, t Minimum weight of the wagon, t Min, t Minl, t

MW-200-D-R 200 200 60 16 4 2

Maxl, t Accuracy classes

0,5 1 2 5

60 50 50 100 500

№	Name	Quantity
1	Strain gauge weighing rail with two weighing sections L=6250 (mm), pcs.	1 set
2	Weighing device TenzoADC-4CH	2 pcs
3	Communication cable 2x2x0.75	2х100 m
4	CPSUnit switching and power supply unit	1 pcs
5	Unregulated switch DGS-1005D	1 pcs
6	Software and hardware complex	1 set
7	Software license, including: 4Gb USB Flash drive with basic software	1 pcs
8	Operational documentation	1 set

Additionally:

№	Name
1	Dimensional control system
2	Sound alarm system
3	Lighting system
4	Video recording system
5	Wagon number reading system
6	Control cabinet
7	Support frame

Train control system – designed for visual monitoring of the condition of cars and trains, automated detection and recording of malfunctions and violations that threaten traffic safety.

The system allows:
- - inspect trains, wagons, and cargo during warehouse movement;
  - automatically detect cases of violation of wagon dimensions, and technical conditions for placing and securing cargo;
  - monitor the safety of transported cargo;
  - conduct video recording of warehouse passage with the ability to create a video archive and print images;
  - collect, process, store, and document information about warehouses.
The functionality of the system can be expanded depending on the tasks set by integrating wagon scales, thermal imagers, as well as comprehensive solutions for monitoring the departure of rolling stock.

unnamed 2 2 fba0439c Dynamic wagon scales without foundations up to 90 km

Do you have any questions?
Call us +38 (0800) 301 770

+38 (0800) 301 770

or leave a request and our manager will contact you

Submit a request

Dynamic wagon scales without foundations up to 90 km

Navigation

Catalog

Contacts

Scale series model	Maximum weight of the wagon, t	Max, t	Maxl, t	Minimum weight of the wagon, t	Min, t	Minl, t
MW-200-D-R	200	200	60	16	4	2

Maxl, t	Accuracy classes
Maxl, t	0,5	1	2	5
60	50	50	100	500