Single-platform metal automobile scales MA-S series

• Ultra-strong design (there are no analogs in Ukraine)
• Installed on any horizontal area with asphalt concrete, concrete pavement, or reinforced concrete road slabs.
• Installation of scales is possible at any time of the year.
• Work 24/7. The flow of weighed machines is not limited.
• Wide possibilities for automating weighing thanks to the additional equipment of truck scales with a system for organizing traffic and identifying vehicles.
• You get the opportunity to automatically control the weighing process, determine the weight, identify the machine, keep records, and transmit results to a remote server.
• Analog, A/D, and Digital Strain Gauge Weight Measuring System
• The scales have a high-quality paint coating and primer.
• The shortest possible installation, calibration, and verification times. The scales are easy to install and maintain – commissioning the scales takes from 2 hours.
• Car scales do not require adjustments during the operation
• Automatic diagnostics of each channel in case of emergencies
• The cable length from the digital converter to the weighing room can be up to 1000 meters.
• Ability to determine the position of the center of mass of the load
• Guaranteed weighing accuracy in any weather

Determination of total weight and axle loads of vehicles on one scale (optional)

You only get one scale. This saves you a lot of money! One scale solves two problems! You get full control of the total weight and axle loads of the vehicles before setting off on a journey.

Compliance with the requirements of the Law of June 29, 2021 No. 1582-IX. “On amendments to certain legislative acts of Ukraine on certain issues of dimensional and weight control”

From June 29, 2021, control over heavy vehicles will be stricter. The law increases the liability of road carriers for exceeding the size and weight standards established by law. By installing scales with an axial weighing function, you will reliably protect yourself from possible fines for exceeding the permitted loads on the vehicle axle.

Determining the number of slopes on the axles and the center distances of the vehicle (optional)

This helps to correctly distribute the cargo in the body along the axles to prevent the vehicle from being sent on a journey with an overload. Using this function saves time when registering weighing, helps eliminate erroneous data entry by the operator, and also allows you to organize weighing completely automatically.

Simple and reliable design

To determine axial loads, the scale design does not use additional sections or built-in platforms. This significantly increases the reliability of the scales.

Protection against unauthorized influence on the weighing result

At the heart of automobile scales, there is a unique measurement system “METAS”. It reliably protects the signal from possible measurement results to distort the readings using radio technology.

Certified in Ukraine according to DSTU EN 45501:2017.

2 year warranty!

Thanks to our accumulated experience in manufacturing vehicle scales and trouble-free operation, we offer a 2-year warranty on the scales. You will be reliably insured against additional financial costs during the entire warranty period of operation of the weight.

Design

The load-receiving device is a metal structure consisting of interconnected parts, a base, and a weight platform, resting on the nodes for installing strain gauges located in the corners and, in turn, resting on the bases. Unlike other manufacturers, we do not produce hermetically welded orthotropic beams, therefore our design has natural ventilation and does not collect destructive condensate. In addition, the use of standard rolled metal, assembled according to the principle of a beam cage for heavy loads, allows you to monitor the condition of the metal structure and carry out preventive work without unnecessary mechanisms and effort.

Self-leveling design

The load-receiving platform rests on 4 sensors and has a “hammock” type of design; if the surface is uneven or one of the resistance points fails, the platform will be measured and take the shape of the irregularities without loss of metrological parameters.

Reliable protection of scales from longitudinal and transverse displacements of load-receiving platforms during the passage and braking of the vehicle

In most scales produced by other manufacturers, the stabilization of the load-receiving platforms is carried out using screw stops, which are inconvenient to use due to the need for their constant adjustment. The design of our stabilizers does not require adjustment during operation and also eliminates the longitudinal and transverse removal of load-receiving platforms when driving and braking a vehicle.

Ease of maintenance of scales

The sensors are located on the side, which greatly simplifies access to them.

Protection of the sub-platform space of scales and load cells from dirt getting on them

The improved design of the flaps using reinforced rubber minimizes the ingress of dirt from the car wheels into the underplatform space of the scales and strain gauges.

The metal structure of the scales is made using standard rolled metal.

The steel structure of the scale meets the requirements:

DBN V.2.6-198:2014, DBN V.2.6-163:2010, DBN V.1.2-14, DSTU-N B.V.1.3 GOST 23118-78, clause 2.1; SNiP III-18-75, paragraphs 1.2, 1.17, 1.18, 1.30, 1.40-1.42, 1.51, 1.56, 1.59, 1.65, 1.68-1.72, 1.82, 1.85; SNiP II-B.3-72.

The material used in the manufacture of scales meets:

DSTU 8768/ GOST 8239, DSTU 8807/ GOST 19425, DSTU 8540:2015 (GOST 19903-2015), DSTU 2834-94 (GOST 16523-97), DSTU 8803:2018 (GOST 14637-89), EN 10365, EN 10025 , EN 10034, DSTU 4484/ GOST 535, DSTU 8541/ GOST 19281 and DSTU 8768.

Standard:

• Load-receiving device (set of platform modules)
• Set of limiters against longitudinal and transverse displacements
• Set of load cells assembled with supports
• Cable distribution with metal conduits
• Weight indicator
• Software

Additional:

• Explosion-proof design
• Set of supporting embedded parts with anchor bolts
• Advanced software CAR MANAGER
• VS
• functions ramp (metal/reinforced concrete/reinforced concrete frame) To automate the process of weighing vehicles and reduce the influence of the human factor, a system for organizing traffic and identifying vehicles (VS CAR MANAGER) is installed, which provides the following capabilities:
• Supports various weighing modes (manual, semi-automatic, automatic)
• Multi-user mode of operation
• Working with video cameras: recording images from cameras during weighing in a database, recognizing license plates
• Custom fields for filling out the weight card
• Extensive reporting and data export capabilities
• The ability to automatically export data to another database in real time
• Maintaining a log of operator actions (login, logout, weighing, editing data, etc.)
• Support for automation devices (control of barriers, traffic lights, work with position sensors and RFID tag readers)
• Possibility of displaying messages to the driver on a text display
• Wide range of administration and configuration options: custom fields for filling out the weight card, setting up automation states for various operating modes of the scales.

To automate the process of weighing vehicles and reduce the influence of the human factor, a traffic management and vehicle identification system (VS CAR MANAGER) is installed, which provides the following capabilities:

• Supports various weighing modes (manual, semi-automatic, automatic)
• Multi-user mode of operation
• Working with video cameras: recording images from cameras during weighing in a database, recognizing license plates
• Custom fields for filling out the weight card
• Extensive reporting and data export capabilities
• The ability to automatically export data to another database in real time
• Maintaining a log of operator actions (login, logout, weighing, editing data, etc.)
• Support for automation devices (control of barriers, traffic lights, work with position sensors and RFID tag readers)
• Possibility of displaying messages to the driver on a text display
• Wide range of administration and configuration options: custom fields for filling out the weight card, setting up automation states for various operating modes of the scales.