General information
882D Belt Scale Integrator
Belt scales used in demanding industries like mining, bulk material blending, and sand or gravel quarries require instrumentation that can keep up. The tough yet compact 882D belt scale integrator is engineered to provide straightforward, accurate data in a wide range of environments — even hazardous locations. Designed with advanced programming capabilities and an I/O option, the 882D can be customized to manage product dosing and metering. A backlit display makes for easy viewing of rate, speed and time, even in lighting conditions where a screen would typically be difficult to read. The 882D’s IP66 stainless steel enclosure protects the instrument from severe weather and is well-suited for exposure to harsh environments. Whether you are belt weighing for process control or a truck, barge or rail loadout application, you can rely on the 882D for durable performance in every setting.
-
Power
Input voltages: 100 to 240 VAC; 9 to 36 VDC
Input frequency: 50/60 HzPower Consumption:
AC: 15 watts; DC: 20 wattsExcitation Voltage:
10 VDC 8 × 350 ohm (16 × 700 ohm) load cellsAnalog Signal Input Range:
-45 mV to 45 mVAnalog Signal Sensitivity:
0.3 μV/graduation minimum at 7.5 Hz;
1.0 μV/graduation typical at 120 HzSample Rate:
7.5 to 120 Hz, software selectableResolution:
Internal: 8,000,000 counts 23-bit
Display: 100,000System Linearity:
± 0.01% full scaleDigital I/O:
Four I/O onboard primary keys, pseudo functions, batching functionsCommunication Ports:
RS-232 full duplex or RS-485 half duplex; USB 2.0 Micro B connector; Ethernet TCP/IPPulse Input:
Dual inputs for redundancyDisplay:
LCD display, 0.8 in, seven-digit, seven-segment weight display, 3 × 20 pixelated prompt areaAnnunciators:
Load, total, rate, speed, zeroKeys/Buttons:
Flat membrane panel, tactile feelOperating Temperature:
Industrial: 14 °F to 122 °F (-10 °C to 50 °C)Dimensions:
(L x W x H)
9.93 × 4.00 × 8.94 inWeight:
12 lb (5.4 kg)Rating/Material:
IP66
Stainless steelWarranty:
Two-year limitedEMC Immunity:
18 KV, 10 V/mApprovals:
CE Approved
cULus Listed -
- LCD display
- Hardware slot for two option cards
- Operator access to audit trail, preset tare, accumulator, time & date and setpoints through menu keys
- Password protected audit trail tracking for configuration and calibration changes
- Setpoints for control and alarms
- Four onboard digital I/O channels
- Four programmable ticket formats up to 1,000 characters
- Filter settings for noise
- Speed inputs
-
Dimensions A 9.93 in (252 mm) G 4.31 in (110 mm) B 8.10 in (206 mm) H 4.14 in (105 mm) C 6.50 in (165 mm) I 4.32 in (110 mm) D 8.94 in (227 mm) E 0.68 in (17 mm) F 0.63 in (16 mm) -
Booklet 882D Belt Scale Integrator
Call us +38 (0800) 301 770
or leave a request and our manager will contact you
