Scales for weighing animals of the MP series (non-resistive execution)

• Accuracy class according to DSTU EN 45501 – III
• Safety margin of a strain gauge, % – 50
• Safety margin of the platform, % – 250
• The material of the supporting structure is made of stainless metal
• Operating temperature -10 to +40 ⁰С
• Protection degree of load cell – IP68
• Indicator protection degree – IP67
• Interface – RS-232 interface
• Display – LED display
• Height of symbols, mm – 25
• Power supply – 220V from the mains and built-in battery
• Battery operation, hours – up to 72
• Warranty, months – 18

• Tare;
• Manual zero setting;
• Automatic zero setting;
• Averaging the mass value;
• Print function from the indicator;
• Selection of filters for operation in vibration conditions;
• Kg, g, lb, oz;
• Bluetooth (optional);
• Wi-Fi (optional) ;
• RS-232 printer connection;
• Connection to 1C (optional).

Electronic scales for weighing livestock are represented by a platform made of durable stainless metal that meets the standards of corrosion resistance. They are equipped with a strong metal fence and two gates that close the through passage. Before weighing, one of the gates is opened, allowing the animal to safely enter the weighing platform via a folding or attached ramp. After the weighing procedure is completed, the second gate opens so that the animal can easily exit.

A special operating mode has been developed to minimize the error caused by animal movements. Robust construction and ease of use are the main advantages of these scales. They are easily installed on any hard surface thanks to four adjustable feet.

The weighing platform is based on one or four strain gauges manufactured by ZEMIC or KELLI. The measuring mechanism is reliably protected against shock and humidity. The display is bright and easy to read, even in sunlight.

The surface of the upper platform is made of stainless steel, which provides reliable protection against corrosion, temperature changes and other negative external influences.

The electronic component of the scales consists of strain gauges manufactured by ZEMIC or KELLI, a weighing indicator manufactured by METAS, a summing box and a strain gauge cable in a protective sleeve. It is also possible to connect the scales to any accounting systems.

State verification is included in the price of the balance.

The scales consist of a corrugated stainless metal weighing platform, a fence with two inputs (height 1000, 1500 mm), four strain gauges with protection class IP67 and IP68, a summing box and a B19S indicator.