SCT-1SX High-Speed Signal Conditioning Transmitter
General information
High-performance multifunctional weight transmitter manages up to 4800 readings per second, for weighing with precision in milliseconds. Integrated fieldbus and web server, allow direct reading and diagnostics of the connected weighing system. The wide range of interfaces makes the integration of weighing into any automation system easier and safer.
Find out the price or get a consultation
-
Power:
12-24 VDC, 5 WPower Consumption:
70 mA min to 100 mA maxExcitation Voltage:
5V, 120 mA, 16 × 350 ohm load cellsAnalog Signal Input Range:
± 39 mVAnalog Signal Sensitivity:
High resolution 0.01 µV/d
Legal for trade 0.3 µV/eA/D Sample Rate:
Up to 4800 Hz
Resolution:
Internal: 1,500,000 counts
Display: 800,000
Legal-for-trade divisions
Up to 10,000e or multi-field 2 x 3,000eDigital I/O:
Two inputs, configurable: 12/24 VDC
Four outputs, configurable: 150 mA 48 VAC/ 150 mA 60 VDCCommunication Ports:
(1) RS-485, (1) RS-232
1 micro-USB port (device)
Serial Port update rate: up to 1600 Hz
Fieldbus update rate: up to 120 HzAnalog Output (if equipped):
Opto. isolated, 16-bit
0 to 20mA, 4 to 20mA (Maximum 350 ohm)
0 to 5VDC, 0 to 10VDC (Minimum 10,000 ohm)Annunciators:
Net, center of zero, stabilityDisplay:
Six-digit (8 mm), red LEDKeys/Buttons:
Five key, membrane panel
Zero (Down), Tare (Up), Mode (Right), Print (Enter), C (On/Off)Dimensions:
(L × W × H)
4.72 x 0.9 x 4.0 in
(120 x 23 x 112 mm)Temperature & Humidity:
For internal use -20°C to 60°C
Approved -10°C to 40°C
Humidity: 85% non-condensingRating/Material:
Enclosure: ABS plastic
Warranty:
One-year limitedApprovals:
CE-M EN 45501
2014/30/EU EMC
2014/35/EU LVD
2011/65/EU RoHS
OIML R61 – MID
OIML R76 -
- Load cell status diagnostics
- USB port for quick programming
- Integrated fieldbus and web server for configuration, diagnostics and data backup
- Process up to 4800 weight readings per second. The high speed allows an extremely accurate weight filtering even with weighing being performed in milliseconds.
- Up to 120 updates per second on Fieldbus
- New power supply circuit of the load cells (up to 16) for a better weighing stability
- Power supply circuit with protections against overloads, polarity reversal and short circuits, specific for industrial environments
- Micro-USB communication port for configuration, diagnostics and data backup is available on all versions
- Modbus RTU protocol integrated on all versions, up to 110 updates per second
- Real-time warning of any faults or disconnections of the load cell
- The integrated web server allows full diagnostics, calibration and remote configuration of the weight transmitter from an Ethernet network
- Calibration via theoretical (mV\V), with sample weights, Web server or xSpeed software tool
- Easy configuration with Rice Lake Tools software
Optional xSpeed Software
- Customization of the weighing filter, to maximize the speed and accuracy in static and dynamic applications
- Graphical weighing analysis for the identification of mechanical disturbances and vibrations. Oscilloscope function for system diagnostics and filter optimization.
Call us +38 (0800) 301 770
or leave a request and our manager will contact you