General information
An alloy steel single-ended beam cell offered from 250 lb to 20,000 lb. Each load cell has 20 ft of cable and is FM approved and NTEP Certified from 500 lb to 10,000 lb.
-
Full Scale Output:
3.0 mV/V ±0.05%
mV/V/ohm calibrationOutput Resistance:
350 (± 3) ohmInput Resistance:
400 (± 20) ohmMaterial/Finish:
Alloy steel, nickel platedTemperature:
Compensated range
-14 °F to 104 °F (-10 °C to 40 °C)
Operating range
0 °F to 150 °F (-18 °C to 65 °C)Seal Type:
Environmentally sealed, IP66Safe Overload:
150% full scaleSafe Sideload:
100% full scaleRated Excitation:
10 VDC (15 V maximum)Combined Error:
0.017% full scaleInsulation Resistance:
>5,000 megohmDeflection:
0.2 to 0.4 mmCable Length:
20 ftCable Color Code:
Red +Excitation
Black –Excitation
Green +Signal
White –SignalWarranty:
Two-year limitedApprovals:
NTEP 18-106
cFMus FM18US0307X -
Rated Capacity A B C D E F G H I J K L M N lb/in 250 to 500 1.00 0.59 0.96 2.20 1.24 5.12 0.53 0.70 1/2-20 UNF 3.00 1.00 0.62 0.25 0.13 1,000 to 5,000 SE 1.24 0.59 0.96 2.20 1.24 5.12 0.53 0.70 1/2-20 UNF 3.00 1.00 0.62 0.25 0.13 5,000 LE to 10,000 1.50 – 1.45 2.99 1.50 6.75 0.80 0.70 3/4-16 UNF 3.75 1.50 0.75 – – 15,000 to 20,000 2.00 – – 4.00 2.00 8.75 1.06 – 1-14 UNS 4.90 2.00 1.00 – – -
Booklet rl32018.
Call us +38 (0800) 301 770
or leave a request and our manager will contact you
