Automobile travel metal scales series MA… – S

• The collapsible design of the scale modules allows the scales to be transported in a standard 20-foot container.
• Wide possibilities for automating weighing thanks to the additional equipment of truck scales with a system for organizing traffic and identifying vehicles. You get the opportunity to automatically control the weighing process, determine the weight, identify the machine, keep records, and transmit results to a remote server.
• Analog, A/D, and Digital Strain Gauge Weight Measuring System
• The scales have a high-quality paint coating and primer.
• Industry-leading scale production time – production of platform scale modules takes 48 hours!
• The shortest possible installation, calibration, and verification times. The scales are easy to install and maintain – commissioning the scales takes from 2 hours.
• Car scales do not require adjustments during the operation
• Automatic diagnostics of each channel in case of emergencies
• The scales remain operational in the event of partial or complete malfunction of one of the load cells
• The cable length from the digital converter to the weighing room can be up to 1000 meters.
• Ability to determine the position of the center of mass of the load
• Guaranteed weighing accuracy in any weather

Determination of total weight and axle loads of vehicles on one scale (optional)

You only get one scale. This saves you a lot of money! One scale solves two problems! You get full control of the total weight and axle loads of the vehicles before setting off on a journey.

Compliance with the requirements of the Law of June 29, 2021 No. 1582-IX. “On amendments to certain legislative acts of Ukraine on certain issues of dimensional and weight control”

From June 29, 2021, control over heavy vehicles will be stricter. The law increases the liability of road carriers for exceeding the size and weight standards established by law. By installing scales with an axial weighing function, you will reliably protect yourself from possible fines for exceeding the permitted loads on the vehicle axle.

Determining the number of slopes on the axles and the center distances of the vehicle (optional)

This helps to correctly distribute the cargo in the body along the axles to prevent the vehicle from being sent on a journey with an overload. Using this function saves time when registering weighing, helps eliminate erroneous data entry by the operator, and also allows you to organize weighing completely automatically.

Simple and reliable design

To determine axial loads, the scale design does not use additional sections or built-in platforms. This significantly increases the reliability of the scales.

Protection against unauthorized influence on the weighing result

Truck scales are based on a unique measurement system “METAS”. It reliably protects the signal from possible measurement results to distort the readings using radio technology.

Certified in Ukraine according to DSTU EN 45501:2017.

2 year warranty!

Thanks to our accumulated experience in manufacturing vehicle scales and trouble-free operation, we offer a 2-year warranty on the scales. You will be reliably insured against additional financial costs during the entire warranty period of operation of the weight.

Construction

Scales are a modular low-profile structure (height of entrance to scales 400 mm) and consist of pairs of tracks connected by connecting beams and weighing sensors. Unlike other manufacturers, we do not make hermetically welded orthotropic beams, so our construction has natural ventilation and does not collect destructive condensate. In addition, the use of standard rolled metal, assembled according to the principle of a beam cage for heavy loads, allows you to monitor the condition of the metal structure, and carry out preventive work without unnecessary mechanisms and efforts.

Convenience of transportation

The platform module of car scales is collapsible. This greatly facilitates the transportation of weight, which can easily be carried in the body of a standard flatbed car.

Reliable protection of scales from longitudinal and transverse shifts of loading platforms during driving and braking of the car

In most scales produced by other manufacturers, the stabilization of the load-receiving platforms is carried out with the help of screw stops, which are inconvenient in operation due to the need for constant adjustment. The design of our stabilizers does not require adjustment during operation, and also completely excludes the longitudinal and transverse removal of the loading platforms during the driving and braking of the car.

The convenience of maintenance of scales

The central hatches of the loading platforms are reliably fixed with special stops and locks. This provides quick and convenient access to the sub-platform space for prompt service maintenance, as well as cleaning the weight from dirt and snow.

Protection of the sub-platform space of scales and strain gauges from getting dirt on them

The improved design of the seals with the use of reinforced rubber minimizes the ingress of dirt from the wheels of the car into the sub-platform space of the scales and on the strain gauges.

The metal structure of the scales is made using standard rolled metal

I-beam beam No. 24, 12. Channel No. 10, 14, 22. Angle 63×5, sheet corrugated 8 mm, sheet g/k 8, 16.

The steel structure of the scales meets the requirements

DBN V.2.6-198:2014, DBN V.2.6-163:2010, DBN V.1.2-14, DSTU-N B.V.1.3 GOST 23118-78, clause 2,1; SNiP III-18-75, paragraphs 1.2, 1.17, 1.18, 1.30, 1.40-1.42, 1.51, 1.56, 1.59, 1.65, 1.68-1.72, 1.82, 1.85; SNiP II-B.3-72.

The material used in the manufacture of scales corresponds

DSTU 8768/ GOST 8239, DSTU 8807/ GOST 19425, DSTU 8540:2015 (GOST 19903-2015), DSTU 2834-94 (GOST 16523-97), DSTU 8803:2018 (GOST 14637-89), EN 10365, EN 100 25 , EN 10034, DSTU 4484/ GOST 535, DSTU 8541/ GOST 19281 and DSTU 8768.

Standard:

• Load-receiving device (set of platform modules)
• Set of limiters against longitudinal and transverse displacements
• Set of load cells assembled with supports
• Cable distribution with metallic cables
• Weight indicator
• Software

Additional:

• Explosion-proof design
• Hatch covers for ground clearance
• Set of supporting embedded parts with anchor bolts
• Wheel breaker (pipe 80 by 80 or DK100)
• Advanced Software VS CAR MANAGER
• Video viewing system and vehicle license plate reading system
• Drive-in ramp (metal/reinforced concrete/reinforced concrete frame)

To automate the weighing process and reduce the influence of the human factor, a traffic management and vehicle identification system (VS CAR MANAGER) is installed, which provides the following capabilities:

• Supports different weighing modes (manual, semi-automatic, automatic)
• Multi-user mode of operation
• Working with video cameras: recording images from cameras during weighing in a database, recognizing license plates
• Custom fields for filling out the weight card
• Extensive reporting and data export capabilities
• The ability to automatically export data to another database in real time
• Maintaining a log of operator actions (login, logout, weighing, editing data)
• Support for automation devices (control of barriers, traffic lights, work with position sensors and RFID tag readers)
• Possibility of displaying driver messages on a text display
• Wide range of administration and configuration options: customizable fields for filling out a weight card, setting up automation states for various modes of operation of the scales.